kenji/webkeyboard
1
Fork 0
Code Releases 7 Activity

update for initial release

Browse Source
This commit is contained in:
kenji
2025-07-17 16:00:26 -04:00
parent 8ed9e02175
commit 9cb62473a1
3 changed files with 6 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files
README.md
+6 -4
View File
@@ -12,9 +12,11 @@ graphical interface served on the webpage.
## Setup
Flash the [webkeyboard.uf2](build/webkeyboard.uf2) file onto
the Raspberry Pi Pico W and connect the Raspberry Pi Pico W with a micro USB
cable to the host computer or other device.
Download the webkeyboard.uf2 file from the latest [release](release) and flash
onto the Raspberry Pi Pico W by holding down the BOOTSEL button while plugging
into your computer so that it appears as a USB drive, then transfer the
firmware file onto the Pico W. After unmounting, connect the Raspberry Pi Pico
W with a micro USB cable to the host computer or other device.
On initial boot, the Raspberry Pi Pico W will enter Access Point mode with
SSID "picokb" and password "password". Connect to this network with another
@@ -28,7 +30,7 @@ Browse back to the main UI page at http://192.168.0.1 and press
"Reboot". The device should automatically connect to the network with the
saved information. You can then connect to the device using a web browser
at the device's assigned IP or hostname by accessing http://IP_ADDRESS or
http://HOSTNAME (http://picokb is no hostname is set).
http://HOSTNAME (http://picokb if no hostname is set).
If the Pico W fails to connect to the saved Wi-Fi network, it will once again
enter Access Point mode, and you can connect to the device directly to modify