kenji/webkeyboard
1
Fork 0
Code Releases 7 Activity

code clean up and added comments

Browse Source
This commit is contained in:
kenji
2025-05-30 09:17:55 -04:00
parent 5184d5c744
commit 94ea767285
8 changed files with 104 additions and 93 deletions
Download Patch File Download Diff File Expand all files Collapse all files
README.md
+8 -7
View File
@@ -18,24 +18,24 @@ cable to the host computer or other device.
On initial boot, the Raspberry Pi Pico W will enter Access Point mode with
SSID "picokb" and password "password". Connect to this network with another
device and open a browser window to [http://picokb](http://picokb).
device and open a browser window to http://192.168.0.1.
Go to the "Configure W-Fi" page and enter the SSID and password to the
network that you would like the Raspberry Pi Pico W to connect. Optionally,
also enter a hostname for the device and static IP information. Hit the "Save"
button to save the network information to device flash.
Browse back to the main UI page at [http://picokb](http://picokb) and press
Browse back to the main UI page at http://192.168.0.1 and press
"Reboot". The device should automatically connect to the network with the
saved information. You can then connect to the device using a web browser
at the device's assigned IP or hostname by accessing http://IP_ADDRESS or
http://HOSTNAME
http://HOSTNAME (http://picokb is no hostname is set).
If the Pico W fails to connect to the saved Wi-Fi network, it will once again
enter Access Point mode, and you can connect to the device directly to modify
the network information.
Alternatively, you can use the device directly in Access Point mode by
accessing the device at [http://picokb](http://picokb). The program is
accessing the device at http://192.168.0.1. The program is
set to reboot automatically to try to reconnect to the nextwork after 10
minutes of inactivity if no keyboard input is received during that time.
@@ -44,7 +44,7 @@ minutes of inactivity if no keyboard input is received during that time.
This software is distributed under the [GNU General Public License version
3](LICENSE), with the exception of the libraries in the following section.
## Attributions
## Credits
The project uses code from the following sources:
@@ -53,5 +53,6 @@ The project uses code from the following sources:
- [Raspberry Pi Pico SDK Examples](https://github.com/raspberrypi/pico-examples)
for a modified version of [pico_w/wifi/lwipopts_examples_common.h](lwipopts.h)
distributed under the BSD-3-Clause license
- [TinyUSB](https://github.com/hathach/tinyusb) for the base version of
[tusb_config.h](tusb_config.h) distributed under the MIT license
- [TinyUSB](https://github.com/hathach/tinyusb) for template versions of
[hid.c](hid.c), [tusb_config.h](tusb_config.h), and
[usb_descriptors.c/h](usb_descriptors.c) distributed under the MIT license