kenji/pico_ble_hid
1
Fork 0
Code Releases 6 Activity

add schematic

Browse Source
This commit is contained in:
kenji
2025-09-11 09:42:11 -04:00
parent 2e9159cb57
commit c430a53755
2 changed files with 14115 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files
README.md
+4 -1
View File
@@ -15,7 +15,8 @@ You will need the following hardware to make the device:
- Raspberry Pi Pico W - Raspberry Pi Pico W
- USB extension cable - USB extension cable
![Wiring of USB connectors to Raspberry Pi Pico W](diagram.png) ![Wiring schematic](schematic.svg)
You will need to cut the USB extension in half and connect the wires from the You will need to cut the USB extension in half and connect the wires from the
female end to the Raspberry Pi Pico W. The default configuration is to attach female end to the Raspberry Pi Pico W. The default configuration is to attach
@@ -32,6 +33,8 @@ respectively. For the data wires, you can solder them to the two test points
TP2 and TP3 on the back of the Raspberry Pi Pico. The white cable goes to TP2 TP2 and TP3 on the back of the Raspberry Pi Pico. The white cable goes to TP2
and the green cable to TP3. and the green cable to TP3.
![Wiring of USB connectors to Raspberry Pi Pico W](diagram.png)
The individual wires on the USB can be fragile, so hot glue or other strain The individual wires on the USB can be fragile, so hot glue or other strain
relief is a good idea. relief is a good idea.
schematic.svg
+14111
View File
File diff suppressed because it is too large Load Diff
Side by Side

After

Width:  |  Height:  |  Size: 255 KiB