switch to ESP-IDF

README.md

@@ -69,8 +69,9 @@ these can be configured in YAML.
 Since a lot of new connections will need to be made to ground, I recommend using
 something like a perforated prototype board and make a single connection to
 ground from the prototype board to the front panel control board, then connect
-all other grounds needed for the circuiti to each other using the prototype 
-board. A 2cm$\times$8cm board fits perfectly in the empty space below the front panel in the front panel assemple. I also made all connections to the back of
+all other grounds needed for the circuit to each other using the prototype 
+board. A 2cm $\times$ 8cm board fits perfectly in the empty space below the front panel in the front panel assembly. I also made all connections to the
+back of
 the front panel control board with wires with female Dupont connectors, then
 used male headers on the prototype board so that the additional circuitry can
 easily be removed.

components/hauslane/fan.py

@@ -1,7 +1,7 @@
 import esphome.codegen as cg
 import esphome.config_validation as cv
 from esphome.components import fan, output
-from esphome.const import CONF_OUTPUT_ID
+from esphome.const import CONF_ID
 from . import (
 	HAUSLANE_SCHEMA,
 	CONF_HAUSLANE_ID,
@@ -16,14 +16,14 @@ HauslaneFan = hauslane_ns.class_(
 )
 
 CONFIG_SCHEMA = (
-	fan.FAN_SCHEMA.extend({
-		cv.GenerateID(CONF_OUTPUT_ID): cv.declare_id(HauslaneFan),
+	fan.fan_schema(HauslaneFan).extend({
+		cv.GenerateID(CONF_HAUSLANE_ID): cv.use_id(HauslaneFan),
 	})
 	.extend(HAUSLANE_SCHEMA)
 )
 
 async def to_code(config):
-	var = cg.new_Pvariable(config[CONF_OUTPUT_ID])
+	var = cg.new_Pvariable(config[CONF_ID])
 	await fan.register_fan(var,config)
 
 	paren = await cg.get_variable(config[CONF_HAUSLANE_ID])

components/hauslane/hauslane.cpp

@@ -30,7 +30,9 @@ void Hauslane::setup() {
 	}
 
 	// register ESPHome API service named "command"
+#if defined(USE_API)
 	register_service(&Hauslane::command, "command", {"command"});
+#endif
 }
 
 void Hauslane::loop() {
@@ -49,6 +51,10 @@ void Hauslane::loop() {
 				} else {
 					pos++;
 				}
+			} else if (rx_message.size() > MAX_RX) {
+				parse_state();
+				reading = false;
+				pos = 0;
 			} else {
 				pos = 0;
 			}
@@ -94,27 +100,28 @@ void Hauslane::loop() {
 						button_press(pin_down, true);
 					}
 				} else if (this->light_cur != this->light_target) {
-					if (this->power) {
-						// press light button
-						button_press(pin_light, true);
-					} else {
-						// power on hood first
+					if (this->speed==0 && !this->light_target) {
+						// request light turn off and fan is off, so simply hit power button
 						button_press(pin_power, true);
+					} else if (!this->power && this->light_target) {
+						// request light on and fan off, so power on hood first
+						button_press(pin_power, true);
+					} else if (this->power) {
+						// press light button to toggle
+						button_press(pin_light, true);
 					}
 				} else {
 					// target already met, so reset flag
 					this->meet_target=false;
 				}
-			} else if (this->speed==0 && !this->light_cur) {
+			} else if (this->speed==0 && !this->light_cur && this->power) {
 				// reset power flag
-				if(this->power) {
 				this->power=false;
 				ESP_LOGD(TAG, "Hood power: %d", this->power);
 			}
 		}
 	}
 }
-}
 
 // Components are required to dump their configuration using ESP_LOGCONFIG in
 // the dump_config() method. This method is used exclusively to print values
@@ -142,7 +149,7 @@ void Hauslane::set_speed(int new_speed) {
 
 // read message on rx line and turn into current state of fan and light
 void Hauslane::parse_state() {
-	size_t len = rx_message.size()-4;
+	size_t len = rx_message.size()-END_LEN;
 	std::string msg;
 	std::vector<uint8_t> msg_hex;
 
@@ -158,20 +165,20 @@ void Hauslane::parse_state() {
 	// oscilloscope, but as there is only one-way communication from the front
 	// panel to the main controller board, this would only be useful if
 	// replacing the front panel entirely
-	const std::vector<uint8_t> off_0{0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce};
-	const std::vector<uint8_t> on_0{0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6};
-	const std::vector<uint8_t> off_1{0xce, 0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6, 0xce, 0xce};
-	const std::vector<uint8_t> on_1{0xce, 0xc6, 0xce, 0xce, 0xce, 0xce, 0xce};
-	const std::vector<uint8_t> off_2{0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6, 0xce, 0xce};
-	const std::vector<uint8_t> on_2{0xce, 0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6, 0xce, 0xc6};
-	const std::vector<uint8_t> off_3{0x38, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce};
-	const std::vector<uint8_t> on_3{0x38, 0xc6, 0xce, 0xce, 0xce, 0xce, 0xce};
-	const std::vector<uint8_t> off_4{0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6, 0xce, 0xce, 0xce};
-	const std::vector<uint8_t> on_4{0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce};
-	const std::vector<uint8_t> off_5{0xc6, 0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6, 0xc6, 0xce, 0xce};
-	const std::vector<uint8_t> on_5{0xc6, 0xc6, 0xce, 0xce, 0xce, 0xce, 0xc6};
-	const std::vector<uint8_t> off_6{0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0x38, 0xce, 0xce};
-	const std::vector<uint8_t> on_6{0xce, 0xc6, 0xce, 0xce, 0xce, 0xce, 0x38};
+	const std::vector<uint8_t> off_0{0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0x00};
+	const std::vector<uint8_t> on_0{0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6, 0xfe};
+	const std::vector<uint8_t> off_1{0xce, 0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6, 0xce, 0xce, 0xc0};
+	const std::vector<uint8_t> on_1{0xce, 0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xfe};
+	const std::vector<uint8_t> off_2{0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6, 0xce, 0xce, 0xfe};
+	const std::vector<uint8_t> on_2{0xce, 0xce, 0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6, 0xce, 0xc6, 0xfe};
+	const std::vector<uint8_t> off_3{0xce, 0x38, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6, 0xce, 0xce, 0x00};
+	const std::vector<uint8_t> on_3{0xce, 0x38, 0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6, 0xce, 0xfe};
+	const std::vector<uint8_t> off_4{0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6, 0xce, 0xce, 0xce, 0x00};
+	const std::vector<uint8_t> on_4{0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xfe};
+	const std::vector<uint8_t> off_5{0xc6, 0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6, 0xc6, 0xce, 0xce, 0x00};
+	const std::vector<uint8_t> on_5{0xc6, 0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xc6, 0xce, 0xfe};
+	const std::vector<uint8_t> off_6{0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0xce, 0x38, 0xce, 0xce, 0x00};
+	const std::vector<uint8_t> on_6{0xc6, 0xce, 0xc6, 0xce, 0xce, 0xce, 0xce, 0xce, 0x38, 0xce, 0xfe};
 
 	// print out formatted hex string to log
 	char buf[5];
@@ -224,6 +231,10 @@ void Hauslane::set_state(bool set_light, uint8_t set_speed) {
 		// save current state of light in memory
 		ESP_LOGD(TAG, "Received light state: %d", set_light);
 		this->light_cur = set_light;
+		if (!this->meet_target) {
+			// sync target light state if changed by button press
+			this->light_target = set_light;
+		}
 		// send light state to API if it is active
 		if (this->send_light_state) {
 			ESP_LOGD(TAG, "Sending new light state.");
@@ -234,12 +245,20 @@ void Hauslane::set_state(bool set_light, uint8_t set_speed) {
 		// save current state of fan in memory
 		ESP_LOGD(TAG, "Received fan speed: %d", set_speed);
 		this->speed = set_speed;
+		if (!this->meet_target) {
+			// sync target fan state if changed by button press
+			this->speed_target = set_speed;
+		}
 		// send fan state to API if it is active
 		if (this->send_fan_speed) {
 			ESP_LOGD(TAG,"Sending new fan speed.");
 			this->send_fan_speed(set_speed);
 		}
 	}
+	if (!this->power && (set_speed > 0 || set_light)) {
+		// set power to on if light or fan are on
+		this->power = true;
+	}
 }
 
 // custom component API commands

components/hauslane/hauslane.h

@@ -2,7 +2,9 @@
 
 #include "esphome/core/component.h"
 #include "esphome/components/uart/uart.h"
+#ifdef USE_API
 #include "esphome/components/api/custom_api_device.h"
+#endif
 #ifdef USE_LIGHT
 #include "esphome/components/light/light_output.h"
 #endif
@@ -13,10 +15,11 @@
 namespace esphome {
 namespace hauslane {
 
-static const unsigned char MSG_START[] = {0x08, 0x08, 0x08, 0xfe, 0xc0};
-static const unsigned char MSG_END[] = {0xc0, 0xce, 0xce, 0xce};
-static const uint8_t START_LEN=5;
-static const uint8_t END_LEN=4;
+static const unsigned char MSG_START[] = {0x08, 0x08, 0x08, 0xfe, 0x00, 0xc0};
+static const unsigned char MSG_END[] = {0xc0, 0xce, 0xce, 0xce, 0xc6};
+static const uint8_t START_LEN=6;
+static const uint8_t END_LEN=5;
+static const size_t MAX_RX=30;
 static const int DELAY=250; // how long to press/release buttons in ms
 
 class Hauslane : public Component, public uart::UARTDevice, public api::CustomAPIDevice {

uc-ps18.yaml

@@ -13,12 +13,15 @@ esphome:
 
 esp32:
   board: esp32-c3-devkitm-1
+  platform:
+    type: esp-idf
 
 # Enable logging
 logger:
   level: DEBUG
 
 api:
+  custom_services: true
   password: !secret api_password
 
 ota: