kenji/aw410k_rgb
1
Fork 0
Code Releases 2 Activity

add schematic

Browse Source
This commit is contained in:
kenji
2025-09-11 10:09:13 -04:00
parent 8082191d4e
commit 7ccf94223a
3 changed files with 14512 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files
.gitignore
+2 -2
View File
@@ -1,2 +1,2 @@
/build/**/* /*/**/*
/external/**/* !/html/**/*
README.md
+2
View File
@@ -20,6 +20,8 @@ You will need the following hardware to make the device:
- light dependent resistor such as GL5528 (specific part number may vary) - light dependent resistor such as GL5528 (specific part number may vary)
- 10k ohm resistor (resistance value may vary) - 10k ohm resistor (resistance value may vary)
![Wiring schematic](schematic.svg)
You will need to cut the USB extension in half and connect the wires from the You will need to cut the USB extension in half and connect the wires from the
female end to the Raspberry Pi Pico (2). The default configuration is to attach female end to the Raspberry Pi Pico (2). The default configuration is to attach
the USB's green wire to pin 1/GP0 and USB's white wire to pin 2/GP1. You will the USB's green wire to pin 1/GP0 and USB's white wire to pin 2/GP1. You will
schematic.svg
+14508
View File
File diff suppressed because it is too large Load Diff
Side by Side

After

Width:  |  Height:  |  Size: 263 KiB