add schematic

2025-09-11 10:13:37 -04:00
parent a1cb13a2f9
commit fed9e7ae70
5 changed files with 14482 additions and 5 deletions
@@ -17,6 +17,8 @@ You will need the following hardware to make the device:
 - light dependent resistor such as GL5528 (specific part number may vary)
 - 10k ohm resistor (resistance value may vary)

+![Wiring schematic](schematic.svg)
+
 You will need to cut the USB extension in half and connect the wires from the
 female end to the Raspberry Pi Pico (2). The default configuration is to attach
 the USB's green wire to pin 1/GP0 and USB's white wire to pin 2/GP1. You will